10 Best Golf Club Epoxy Brands for Securing Your Golf Equipment
This post contains affiliate links. As an Amazon Associate, we earn from qualifying purchases.
When it comes to securing your golf equipment, using the right epoxy is essential. A reliable golf club epoxy can ensure that your clubs stay in top condition, providing you with the confidence to make powerful swings without worrying about your equipment failing you. In this article, we will explore the 10 best golf club epoxy brands that are trusted by golfers for their durability and strength. Whether you are repairing a club or customizing your equipment, these epoxy brands are sure to provide you with the peace of mind you need on the golf course.
Top 10 golf club epoxy In The Market
golf club epoxy Reviews
Bestseller No. 1
Brampton PRO-FIX Long Cure Golf Epoxy - Full Set Work Life - Extra Strength -...
- FULL SET WORK LIFE: PRO-FIX Long Cure Golf Epoxy has a 20 minute work life making it perfect for building a full set of golf clubs
- EXTRA DURABILITY: PRO-FIX Long Cure Golf Epoxy is engineered for the high impact of golf shafts/heads and swing speeds over 130 mph
- EXTRA STRENGTH: PRO-FIX Long Cure is the preferred epoxy for Long Drive Competitions because of its extreme bond strength
- USED BY PROS: PRO-FIX Long Cure Golf Epoxy was designed by professional clubmakers and a chemical engineer making it unlike any other golf glue or golf epoxy on the market
- MADE IN THE USA: Brampton Technology manufactures PRO-FIX Long Cure Golf Epoxy in the USA with the highest quality standards
Bestseller No. 2
Bestseller No. 3
Brampton PRO-FIX Quick Cure Golf Epoxy - 30 Minute Golf Club Repair - Golf Epoxy...
- READY IN 30 MINUTES: PRO-FIX Quick Cure Golf Epoxy is engineered for quick golf club repair to get you back on the golf course
- 3 CLUB WORK LIFE: PRO-FIX Quick Cure Golf Epoxy has a 5 minute work life to allow time for 3 golf clubs to be repaired or built before curing
- STRONG BOND STRENGTH: PRO-FIX Quick Cure Golf Epoxy is engineered for the high impact of golf shafts/heads and swing speeds up to 125 mph
- USED BY PROS: PRO-FIX Quick Cure Golf Epoxy was designed by professional clubmakers and a chemical engineer making it unlike any other golf glue or golf epoxy on the market
- MADE IN THE USA: Brampton Technology manufactures PRO-FIX Quick Cure Golf Epoxy in the USA with the highest quality standards
Bestseller No. 4
Brampton PRO-FIX Rapid Cure Golf Epoxy - Single Golf Club Repair - 10 Min Golf...
- RAPID CURING EPOXY: Bonds all shaft types including graphite and titanium. Ready for play in 10-20 minutes with 2-3 minutes of work time. Gets golfers back on the course and out of the repair shop as fast as possible without compromising strength of bond.
- EASY DISPENSE DOUBLE BARREL CARTRIDGE with .85oz: Mix ratio 1:1 by volume. No tools needed.
- AEROSPACE GRADE BONDING STRENGTH: Tensile bonding strength rated at 5,100 PSI. Tough enough for 120+ mph golf swings.
- INSTALLS CLUB HEADS TO GOLF SHAFTS: Use PRO-FIX Epoxy to install new club heads or re-shaft your golf clubs. Follow the easy 8-step instruction process.
- PRO-FIX EPOXY WORKS WITH ALL SHAFT AND CLUB HEAD MATERIALS: Many epoxy types won’t work properly with graphite or titanium.
Bestseller No. 5
Golf Clubs Head Hosel Brush Golf Shaft Ferrules Brush Wire Brush Cleaning Tool...
- What you will receive: you will receive 2 pieces of golf club head hosel brushes, which can help you to clean your golf club; These golf clubs head hosel brushes are abundant to meet your cleaning demands, and you can share them with your family members or friends who love playing golf
- Quality material: these golf club hosel cleaning brushes are made of quality stainless steel material, which is reliable and sturdy for you to clean your golf clubs, not easy to wear or break, and they can provide you with a long term service
- Suitable sizes: each wire brush cleaning tool measures approx. 0.35 inch in diameter, and approx. 3.15 inch in length; The size of the wire brush cleaning tool is suitable for 0.335 inch hosel hole of wood rod and 0.355 inch or 0.370 inch hosel of iron rod, convenient for you to use
- A wide range of uses: you can use these golf club brushes to clean the hosels or prepare them for reassemble easily; In addition, you also can use them to clean or polish your golf club heads and enhance the adhesive force of the golf club head, prolonging the service life of golf clubs
- Fit for crowds: this wire brush for iron and wood is suitable for both men and women, old and young, beginners or experienced golfers, which is a practical tool for you to clean the hosels of golf clubs, bringing you a pleasant using experience
Bestseller No. 6
Brampton PRO-FIX Glass Shafting Beads - Golf Club Shaft Installation Stabilizer...
- PERFECT FOR GOLF CLUB SHAFT INSTALLATION: Stabilize and properly centers the shaft in the hosel with glass oxide granules.
- PRO-FIX SHAFTING BEADS: Helps loose fitting shafts, cushions impact, reduces breakage and increases viscosity of the epoxy mix.
- INCREASE THE STRUCTURAL STRENGTH OF BOND: For use with all PRO-FIX Epoxy.
- MIX 2%-4% by VOLUME with EPOXY: DO NOT EXCEED these ratios.
Bestseller No. 7
GolfWorks Golf Club Shaft Adaptor Epoxy Adhesive Glue (1)
- Golfworks adaptor adhesive is specifically formulated to enhance the bond between graphite golf shafts and the milled aluminum material used to manufacture hosel adapters
- Gel time of 30 minutes and will cure to playable strength in 90 minutes
- White in color
- 14 ml syringe provides enough adhesive to assemble 12-14 adapters
Bestseller No. 8
The GolfWorks Max Strength Tour Set Plus Beaded Epoxy 50ml (1)
- The best selling epoxy, Maximum Strength Tour Set Plus, with epoxy shafting beads inserted directly into the epoxy mix
- he Maximum Strength tour Set Plus Beaded Epoxy is recommended when the shaft to hosel fit is loose
- The added beads keep the shaft centered in the hosel and actually create a cushion at impact
- A must need product for Re-Shafting as it cures reliable
- NOTE: An Epoxy Gun and 2:1 Plunger are required for proper dispensing
Bestseller No. 9
DINGSEN Golf Club Epoxy- 30 Minute Golf Shaft Repair - 4.2oz Quick Cure Golf...
- 30 MINUTES TO PLAYTIME：The Quick Cure Golf Epoxy has a 5 minute work life and 30 minute cure time, getting you back into the swing of the game quickly. Ideal for golf club restoration.
- WATERPROOF: The golf club epoxy glue cures to a clear finish, concealing repairs and offering 100% waterproof protection for use in any outdoor conditions.
- EXTRA DURABILITY: The Quick Cure Golf Epoxy is engineered for the high impact of golf shafts/heads and swing speeds over 125 mph.
- UNPARALLELED STRENGTH: The quick cure golf epoxy is the ideal choice of glue for competitive long driving, thanks to its unparalleled bond strength.
- EASY TO USE: Sand the golf club head with a sanding belt, squeeze out the A and B epoxy in a 1:1 ratio, mix thoroughly (20-30 seconds) and apply to the wear areas of the golf club. Then screw the shaft into the sheath of the club head to coat all surfaces. Eventually wipe the excess epoxy off the club with alcohol and leave the club upright for at least 30 minutes for it to fully solidify.
Bestseller No. 10
The GolfWorks EZ Pour High Strength Shafting Epoxy 16oz Part A & B
- This industry standard high-impact, high-strength epoxy is formulated for clubmakers
- Creates a very strong bond, high shear strength for very high torque resistance
- The High-Strength Epoxy is a 1:1 mix ratio
- Sets in 18 hours and cures in 24 hours
- 1 Set of 2 - 8oz Bottles (Part A & Part B)
